ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Setting IP gateway for Lab Gruppen amp.  (Read 134 times)

Phillip Ivan Pietruschka

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 56
Setting IP gateway for Lab Gruppen amp.
« on: July 04, 2021, 06:20:42 am »

Does anyone know if itís possible, and how, to set the Gateway for the Control ETH port on a D10:4L (or presumably other recent lab amps, since they share the Lake control software)?

Said software exposes the IP and Subnet for setting; but not the gateway. So I have a strange conundrum where I cannot access the control ETH from outside its local subnet/vlan; but I can access (Ping) the Dante ETH, which as Iím sure many of you know isnít much use from outside the local subnet.

The very same software is high in the running for my least favourite UI ever
Logged

ProSoundWeb Community

Setting IP gateway for Lab Gruppen amp.
¬ę on: July 04, 2021, 06:20:42 am ¬Ľ


Pages: [1]   Go Up
 



Page created in 0.019 seconds with 19 queries.