ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Sonifex Dante break in / out boxes. Anyone care to comment on converters  (Read 380 times)

theo mack

  • Newbie
  • *
  • Offline Offline
  • Posts: 19

Im looking for a cost effective solution to add 16 line level Dante inputs.

The sonifex-avn-ai16-16-input-dante-reg-interface-poe seems to be a contender.
The 16 ins would be be in a wall panel attached to a variety of mic preamp outputs in a remote recoding room in a music facility.

I have no experience with the line. Im wondering about the quality of conversion.

Can anyone comment on the sonifex product line or suggest another similar 16 channels of Dante break in?

https://www.sonifex.co.uk/avn/avn-ai16.shtml
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6361
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC

Im looking for a cost effective solution to add 16 line level Dante inputs.

The sonifex-avn-ai16-16-input-dante-reg-interface-poe seems to be a contender.
The 16 ins would be be in a wall panel attached to a variety of mic preamp outputs in a remote recoding room in a music facility.

I have no experience with the line. Im wondering about the quality of conversion.

Can anyone comment on the sonifex product line or suggest another similar 16 channels of Dante break in?

https://www.sonifex.co.uk/avn/avn-ai16.shtml


Do you have a PoE capable Ethernet Switch to power it?
Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

theo mack

  • Newbie
  • *
  • Offline Offline
  • Posts: 19


Do you have a PoE capable Ethernet Switch to power it?

Yes, but Id probably buy a managed switch with POE for this use case.
Logged

Mike Kahrs

  • Newbie
  • *
  • Offline Offline
  • Posts: 44

Yes, but Id probably buy a managed switch with POE for this use case.

An employer just received two AO16.  Manual says POE+ and all I have is POE af and 24v passive.  I'm thinking I'll buy two injectors and not replace any of the switches I have that already work to my satisfaction. Opinions?
« Last Edit: June 29, 2021, 05:57:14 pm by Mike Kahrs »
Logged
Why know when you can guess...

ProSoundWeb Community


Pages: [1]   Go Up
 



Page created in 0.04 seconds with 22 queries.