ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha MG12  (Read 2253 times)

Rosales Geffrard

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Yamaha MG12
« on: May 03, 2021, 09:11:21 AM »

Hey everyone!
We've just purchased a Yamaha MG12 to be used as a stage submixer. Because it is a powered mixer and our speakers are also powered, we could not use the line out. So, we used the monitor line to send the sound out to the main mixer. The problem? none of the faders are operative. We can only use the gain knob and the monitor knob to increase or decrease the volume. Question: What did we do wrong and how can we fix the issue? Grace and Peace
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Posting Rules
« Reply #1 on: May 03, 2021, 11:28:03 AM »

Hey everyone!
We've just purchased a Yamaha MG12 to be used as a stage submixer. Because it is a powered mixer and our speakers are also powered, we could not use the line out. So, we used the monitor line to send the sound out to the main mixer. The problem? none of the faders are operative. We can only use the gain knob and the monitor knob to increase or decrease the volume. Question: What did we do wrong and how can we fix the issue? Grace and Peace

Please go to your profile and change your name to your real full name as required by the posting rule.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: May 03, 2021, 11:28:03 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 24 queries.