Hallo everyone,
I have a Yamaha EMX-5000-20 Powered Mixer, a pair of JBL JRX118sp Powered Subwoofers and a pair of JBL SF 15 Passive Speakers (8 Ohms each).
I have read the manual of the Yamaha Mixer about ten times, but I can't figure out, hoe the internal power amps works.
In the manual it says :
Set this as appropriate for the size of the room or
the input capacity of the speakers.
• 500W + 500W
The two internal amps will produce a maximum
of 500W + 500W/4W.
• 300W + 300W
The two internal amps will produce a maximum
of 300W + 300W/4W.
• 100W + 100W
The two internal amps will produce a maximum
of 100W + 100W/4W.
Can I still use my 8 Ohms Speakers? If yes which of the three setups should I use (100W, 300W or 500W)
The Speakers work between 250-1000 W.
I also don't understand, if the internals power amps send the signal only to the Speaker Outputs?
I also have a Crown XLS-602 Power Amp and a Behringer Super-X Pro CX2310 Crossover. Do I really need them or could I just use the Yamaha to connect my 4 Speakers (2 Subs+2 Speakers)
Every recommendation is welcome