Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Console Connectivity Solutions

Chain 2 speakers

(1/1)

Abel Masó:
I have two speakers and I want to chain one with another. How can I do it with the speakers that I show in the image attach. The speakers are RCF Art 312-A. Greetings.

Mac Kerr:

--- Quote from: Trohan on April 27, 2021, 04:28:10 PM ---I have two speakers and I want to chain one with another. How can I do it with the speakers that I show in the image attach. The speakers are RCF Art 312-A. Greetings.

--- End quote ---

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

Paul Johnson:
Go in on the XLR, then use the other XLR to connect to the input of the next unit. The XLR male and female are looped through internally, so you can link a number together in this way.

Brian Jojade:
The picture you posted literally has the instructions for how to connect multiple speakers.

Plug your source into the first speaker XLR input labeled with a 1, then plug another XLR cable coming out of the XLR labeled 5 to the XLR input of the 2nd speaker labeled 1.  Repeat as desired.

Navigation

[0] Message Index