ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: L 1450 plug  (Read 2429 times)

charles strickland

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 64
L 1450 plug
« on: April 25, 2021, 06:03:48 PM »

 Hi I am looking for a place to buy an L14 50 p plug that will work with 4/4 wire straight blade. Thanks for the help.
Logged

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3091
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: L 1450 plug
« Reply #1 on: April 25, 2021, 06:26:29 PM »

Here is larger body style 14-50, but getting 4/4 to fit would still be tough if not impossible.
I know getting 4/4 in to a Hubble CS series is a tight fit.

https://www.generatorfactoryoutlet.com/products/reliance-1450p-50-amp-generator-power-cord-connector-up-to-12000-watt

charles strickland

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 64
Re: L 1450 plug
« Reply #2 on: April 25, 2021, 07:49:04 PM »

Just found  a hubbell HBL 9452c ,  website says it will take up to a 1.3 in cable . Has any one given it a try ?
Logged

charles strickland

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 64
Re: L 1450 plug
« Reply #3 on: May 02, 2021, 06:01:39 PM »

   Great plug , Just finished wiring it up fits nice.
Logged

Mark Oakley

  • Full Member
  • ***
  • Offline Offline
  • Posts: 198
Re: L 1450 plug
« Reply #4 on: June 17, 2021, 09:09:43 AM »

Just found  a hubbell HBL 9452c ,  website says it will take up to a 1.3 in cable . Has any one given it a try ?

I own: (1) HBL9431c-30A, 240v "Dryer" plug
          (2) HBL9451c-50A, 240v "Stove" plugs
          (1) HBL9461c-60A, 240v "Stove" plug

They will all take up to #4 feeder. Pricey but good.

-Mark
Logged
Oakley Audio

ProSoundWeb Community

Re: L 1450 plug
« Reply #4 on: June 17, 2021, 09:09:43 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 20 queries.