Church and H.O.W. Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums > Church Sound

Link x32 console board to x32 stage box

(1/2) > >>

Rick Collins:
 So our church has moved into the digital age with a X32 console board. Do to shipping problems we had to start with our old analog snake. and it work fine. NOW we received the X32 stage box and for the life of me, I can't get the box to link with the board. I've watched dozens of videos and tried to copy what they did, step by step but It still isn't working. I know it's probably it's a couple of clicks here or there. Can ANYBODY help me ???

Kevin Maxwell:

--- Quote from: Rick Collins on April 09, 2021, 10:39:31 am --- So our church has moved into the digital age with a X32 console board. Do to shipping problems we had to start with our old analog snake. and it work fine. NOW we received the X32 stage box and for the life of me, I can't get the box to link with the board. I've watched dozens of videos and tried to copy what they did, step by step but It still isn't working. I know it's probably it's a couple of clicks here or there. Can ANYBODY help me ???

--- End quote ---

You might have better luck asking questions about the X32 over here. https://community.musictribe.com/discussions?orderby=modified_date&category_id=52&subcat_id=235&subsubcat_id=322

Which stage box are you using? Have you check to see if the firmware in the X32 and the stage box are compatible with each other? They don't always come with the latest Firmware installed. What versions are you running in each device?

What kind of cabling are you using between the 2 devices? In what order are you turning the 2 on? Is this all new stuff or are they used?

Rick Collins:

--- Quote from: Kevin Maxwell on April 09, 2021, 11:53:34 am ---You might have better luck asking questions about the X32 over here. https://community.musictribe.com/discussions?orderby=modified_date&category_id=52&subcat_id=235&subsubcat_id=322

Which stage box are you using? Have you check to see if the firmware in the X32 and the stage box are compatible with each other? They don't always come with the latest Firmware installed. What versions are you running in each device?

What kind of cabling are you using between the 2 devices? In what order are you turning the 2 on? Is this all new stuff or are they used?

--- End quote ---

It is an X32 stage box. Ordered together but box was back ordered. I will try the other poster board. Thanks

Kevin Maxwell:

--- Quote from: Rick Collins on April 09, 2021, 01:38:47 pm ---It is an X32 stage box. Ordered together but box was back ordered. I will try the other poster board. Thanks

--- End quote ---

It may be a stage box to be used with an X32 but there is no stage box with the model number X32. There are many different stage boxes. Some of them are S32, S16, SD16 SD8 also there are the Midas versions like the DL32, DL16 and many more.

Dave Pluke:

--- Quote from: Rick Collins on April 09, 2021, 10:39:31 am --- So our church has moved into the digital age with a X32 console board. Do to shipping problems we had to start with our old analog snake. and it work fine. NOW we received the X32 stage box and for the life of me, I can't get the box to link with the board. I've watched dozens of videos and tried to copy what they did, step by step but It still isn't working. I know it's probably it's a couple of clicks here or there. Can ANYBODY help me ???

--- End quote ---

Quick overview:  Connect via CAT5 (min) to the AES ports on both devices. Go into Routing on the X32 and tell it to use the AES inputs (and outputs, if applicable) rather than the onboard ones (which are the default). That *should* be all you need to do.

Dave

Navigation

[0] Message Index

[#] Next page

Go to full version