ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Intercom DIY 2021  (Read 928 times)

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1076
  • Westchester Co., NY, USA
Re: Intercom DIY 2021
« Reply #10 on: April 08, 2021, 04:28:50 pm »

My understanding is that if you scale green-go up to the size of traditional systems it will end up costing more.

What constitutes the "size of traditional system"? As you scale up a matrix based system, you not only add user stations, but user port cards as well, or maybe a second or third frame. With the frameless systems, all that's ever added is user stations, which is the case with any intercom system, and the Telos and GG price points are quite favorable compared to the IP panels and desk sets from RTS, Riedel and Clear-Com.
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1076
  • Westchester Co., NY, USA
Re: Intercom DIY 2021
« Reply #11 on: April 08, 2021, 04:30:31 pm »

...which is probably why no one has been crazy enough to do what I'm suggesting. :D

Um, look a the business we're all in: I think the crazy threshold has long since been surpassed  ::)
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

Andrew Herbein

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Intercom DIY 2021
« Reply #12 on: April 22, 2021, 12:12:26 pm »

I'm surprised no one has mentioned the Studio Technologies Dante Intercom Engine as a matrix.
Logged

ProSoundWeb Community

Re: Intercom DIY 2021
« Reply #12 on: April 22, 2021, 12:12:26 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.039 seconds with 25 queries.