ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: QL5 Gain Help  (Read 322 times)

jacobgoldberger

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
QL5 Gain Help
« on: March 28, 2021, 05:57:49 pm »

I am having trouble getting a good clean audio signal from my Shure ULX to the Ql5. On the ULXp4 Receiver I am showing great levels, but on the Yamaha QL5 I can barley get -60 DB. If I bring up the gain, it starts to sound terrible. I have tried on multiple microphones. Any help is appreciated.
Logged

Luke Geis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2265
    • Owner of Endever Music Production's
Re: QL5 Gain Help
« Reply #1 on: March 28, 2021, 06:27:07 pm »

Do you by chance have the gain selector on the Receiver set to Mic? If so, quickly and assuredly switch it to Line. The QL has no problem making anything sound good, so it is either the mic, or the receiver. In this case, I would bet the gain selection switch on the back of the receiver is set to mic. Switch it to line and report back.
Logged
I don't understand how you can't hear yourself

ProSoundWeb Community

Re: QL5 Gain Help
« Reply #1 on: March 28, 2021, 06:27:07 pm »


Pages: [1]   Go Up
 



Page created in 0.02 seconds with 20 queries.