Question, were using an x32 full console at our church which is configured to output a live stream via bus mixes 9/10 to a computer running OBS through X-USB. Then we're using the same computer at times to input audio back to the x32 via the card-1 X-USB into aux 1/2 inputs. The problem I notice is, when the band is playing and outputting audio via bus mixes back to the computer into OBS the computer returns the signal back to the x32 aux 1/2 inputs, so it duplicates. I can mute AUX1/2 when the band is playing, so that's ok, but what happens when the computer needs to feed the audio back to the x32 into aux 1/2 using the same computer running the stream?
It seems like it's going to duplicate since the x32 will receive the computer audio via the X-USB inputs, but the x32 needs to send the audio back from bus mix 9/10 back to the computer to live stream the computer audio. Is there a good way to handle this problem if using one computer to handle normal band OBS live stream, but then be able to play computer video audio back to the board that can be live streamed?
Tnx, Rob.