ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Frd, zma and ascii  (Read 662 times)

dian r subekti

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Frd, zma and ascii
« on: February 24, 2021, 11:16:38 PM »

Hi all.  Has anyone tried to create frd and zma files based on ascii in smart live version 5.4 or 7 ?.
Logged

Russell Ault

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1383
  • Edmonton, AB
Re: Frd, zma and ascii
« Reply #1 on: February 25, 2021, 03:07:14 AM »

Hi all.  Has anyone tried to create frd and zma files based on ascii in smart live version 5.4 or 7 ?.

My quick bit of Googling suggests that Smaart's ASCII format (in v8, anyway) should be roughly compatible with FRD (not sure about ZMA). You may have to comment out (with an asterisk) or remove everything above the actual data in the file, and depending on the trace you're exporting you might also need to remove a column (I don't see any mention in for FRD about about a coherence column). You'll also need to change the file extension to FRD (of course).

-Russ
Logged

Chris Grimshaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
  • Sheffield, UK
    • Grimshaw Audio
Re: Frd, zma and ascii
« Reply #2 on: February 25, 2021, 03:04:41 PM »

(not sure about ZMA)

ZMA is the impedance plot, so an entirely different measurement technique.

Chris
Logged
Sheffield-based sound engineering.
www.grimshawaudio.com

dian r subekti

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Re: Frd, zma and ascii
« Reply #3 on: February 26, 2021, 11:10:11 PM »

ZMA is the impedance plot, so an entirely different measurement technique.

Chris
I tried to remove everything above the actual data in the file with ms excel.  and paste to notepad and save it with the extension .frd and it works.  thanks man
Logged

dian r subekti

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Re: Frd, zma and ascii
« Reply #4 on: February 26, 2021, 11:13:24 PM »

ZMA is the impedance plot, so an entirely different measurement technique.

Chris
Yes, right.  Impedance plots are different in measurement techniques.
Logged

ProSoundWeb Community

Re: Frd, zma and ascii
« Reply #4 on: February 26, 2021, 11:13:24 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.065 seconds with 25 queries.