ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Weird Behringer XR18 cue issue  (Read 351 times)

Brad Bohannon

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Weird Behringer XR18 cue issue
« on: February 19, 2021, 08:24:14 pm »

Bus 1&2 stereo linked to create stereo in-ear mix at Aux 1&2 outs. At home, I thought Id just use the headphone out and cue the stereo mix.  Issue is that cueing the bus 1&2 is L/R reversed.  I thought maybe the circuit was wired backwards, but cueing the main L/R bus is fine.  Next I patched my L/R mains into the Aux 1&2 outs.  Panning in the actual Bus 1&2 is fine, just the cue is backwards.  Checked 3&4 and 5&6.  They all cue backwards from the panning on the actual bus.  Anybody else experience this?
Logged

Brad Bohannon

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Weird Behringer XR18 cue issue
« Reply #1 on: February 20, 2021, 08:54:45 am »

Found a firmware update that fixed this.
Logged

ProSoundWeb Community

Re: Weird Behringer XR18 cue issue
« Reply #1 on: February 20, 2021, 08:54:45 am »


Pages: [1]   Go Up
 



Page created in 0.022 seconds with 18 queries.