ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: LED PAR CAN Fixture - Diffuser or Diffusing  (Read 223 times)

Richard Ed

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
LED PAR CAN Fixture - Diffuser or Diffusing
« on: February 07, 2021, 06:04:59 pm »

Hi there,

This forum has got some really valuable information and than you all for the contributions...

This is my first question and would really appreciate some help.

We have a stage that is 10m wide x 5m deep. we have about 17 PAR LEDs lighting up the stage.

What we are noticing is that the lights are too bright at certain spots and quite dull in other spots and also shadows. I have attached a picture for reference.

We had few options in mind and wonder which ones would be suitable. I have listed them in the order of our preference.

1. Install acrylic sheets to the lights to diffuse the lights. Then Shuffle the lights that we have, so that we have some lighting from sides and back
2. Add more lights from other angles to improve the spread of light

Any thoughts on the effectiveness of option 1? Have people added acrylic sheets to the LED par cans to diffuse and get a wider spread? Any thoughts on this would be very much appreciated.


Logged

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2458
  • San Rafael, CA
Re: LED PAR CAN Fixture - Diffuser or Diffusing
« Reply #1 on: February 07, 2021, 07:14:45 pm »

Please change to your actual name per the forum rules.
No one will respond until then.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.  And now, Streaming Video!

ProSoundWeb Community

Re: LED PAR CAN Fixture - Diffuser or Diffusing
« Reply #1 on: February 07, 2021, 07:14:45 pm »


Pages: [1]   Go Up
 



Page created in 0.039 seconds with 24 queries.