ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel  (Read 502 times)

Doug Dessero

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel
« on: January 16, 2021, 04:38:21 pm »

Will this, Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel, work in a Clearcom 4 channel intercom system?
I know it's for 6 channels,  gives me spares.
« Last Edit: January 17, 2021, 01:35:42 am by Doug Dessero »
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7001
  • Audio Plumber
Posting Rules
« Reply #1 on: January 16, 2021, 05:50:08 pm »

Will this work in a Clearcom 4 channel intercom system?
I know it's for 6 channels,  gives me spares.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1082
  • Westchester Co., NY, USA
Re: Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel
« Reply #2 on: January 19, 2021, 09:55:49 pm »

Will this, Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel, work in a Clearcom 4 channel intercom system?
I know it's for 6 channels,  gives me spares.

It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2648
  • HeyYahWon! ttsss! ttsss!
Re: Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel
« Reply #3 on: January 20, 2021, 12:54:20 am »

It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.

Although that could also add a very handy Remote Mic Kill Function...  :)
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
bdmaudio@gmail.com

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

Doug Dessero

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel
« Reply #4 on: January 20, 2021, 02:28:58 pm »

It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.

Thanks again Henry.
Logged

ProSoundWeb Community

Re: Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel
« Reply #4 on: January 20, 2021, 02:28:58 pm »


Pages: [1]   Go Up
 



Page created in 0.042 seconds with 24 queries.