An update for the Flow 8, though I don't know if anyone has one yet.
https://community.musictribe.com/discussions/156693/310351/major-flow-8-update-now-liveThe firmware update 11739 for FLOW 8
works with remote app FLOW MIX 1.2 and Windows ASIO/WDM driver version 5.0.
Firmware 11739 is introducing a new memory structure.
* Snapshots stored on the hardware will be deleted!
* Snapshots previously stored in the Apps SNAPSHOT LIBRARY can still be used.
This new FLOW Firmware version contains:
New USB mode
1. Streaming/Recording (switches between 2x4 and 10x4 USB config)
2. Up to 4 channel USB playback (USB OUT 1/2, USB OUT 3/4)
New routing options
1. USB 1/2 can be routed to CH 5/6
2. USB 3/4 can be routed to CH 7/8
3. USB 1/2 or USB 3/4 can be directly routed to MONITOR SEND 1/2 TRS output
Option to stereo link MON1/2
Option to change headphone output
1. MAIN-Mix, pre- or postfader
2. MON1/2-Mix, pre- or postfader
Option to send FX to MAIN and/or MON buses
Snapshot scope for selectively loading channel settings, effects, routing, MAIN- and MON-Mixes
Fully parametric control of GAIN, FREQ and WIDTH in 4-band and 9-band EQs
Option to transfer the current mixer state via MIDI Sysex
Optional -10dbV output level for MAIN and MON outputs, e.g. when used with DSLR cameras
Output delays 0
340 ms for time alignment in live sound or video production
.
All information in this document is subject to change without any further notice.
Update Process:
To update FLOW 8 to the latest firmware please use the SimplyPUT update tool. SimplyPUT is available
for Mac, Windows and Linux and can be downloaded from the FLOW 8 product page at behringer.com.
WINDOWS:
1. Please make sure you have installed the latest USB-Driver, which is available on the FLOW 8
product page!
2. Connect FLOW 8 to your computer using the USB Type B socket
3. Make sure your computer is connected to the internet
4. Launch Application
SimplyPUT will detect FLOW 8 and search for the latest firmware available on the server
SimplyPUT will always preselect the latest version available
5. Select UPDATE
SimplyPUT will start transferring the new firmware to the hardware using the installed USB-Driver
After a successful update, FLOW 8 will indicate the new Firmware-Version and reboot automatically
MAC:
1. Connect FLOW 8 to your computer using the USB Type B socket
2. Make sure your computer is connected to the internet
3. To launch application please use rightclick (CTRL+Click) and select Open.
Select Open on the upcoming pop up again
SimplyPUT will detect FLOW 8 and search for the latest firmware available on the server
SimplyPUT will always preselect the latest version available
4. Select OPEN
This will enable the DFU-Mode on the hardware.
Recognisable by a red display on the hardware showing the current installed Firmware-Version.
5. Select UPDATE
Simply Put will start flashing the new firmeware to the hardware
After a successful update FLOW 8 will indicate the new Firmware-Version and reboot automatically