ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: How do i get one mic to have eq in the monitor and not others on Behringer X32?  (Read 4226 times)

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto

The attached screenshot shows the mixer view.

-Select a channel
-Go to the Sends tab
-Flip to the 2nd config page
-Adjust the pick point for the bus for the selected channel.

The buses are set in pairs.
Good to know! The pairs thing is a bit of a PITA thought...
Thanks for the info :)

As for monitor sends in pre or post EQ...I'm gonna step back because it's one of "those" topics  ;D
Logged
I don't care enough to be apathetic

ProSoundWeb Community

Re: How do i get one mic to have eq in the monitor and not others on Behringer X32?
« Reply #10 on: February 24, 2021, 06:52:43 AM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 20 queries.