Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Installed Sound/Contracting

distributed / wireless speakers

<< < (3/3)

Magnus Soderman:

--- Quote from: Erik Jerde on October 17, 2020, 02:33:25 AM ---In the USA.  OP is somewhere else in the world Id guess since all his measurements are in metric.

--- End quote ---

Sorry, i'm in sweden  :)

Magnus Soderman:

--- Quote from: Mike Caldwell on October 16, 2020, 07:25:35 PM ---The big amps like yours will direct drive the 70 volt line, no out transformer needed.
An amp that will do at least 600 watts into 8 will make the 70 volt spec, you'll want to go a little
bigger for the line distance.

You can adjust the tap levels the further down line you get to balance the speaker levels.

Would this be just a one off thing or turn into an annual event, any chance they would want to have
year round music.

--- End quote ---

i dont know if this is a one-off , only time will tell :)

i just checked the PX 10 manual, and it turns out that the outputs is BTL coupled and can deliver 700w into 2 ohms
I might just work :). The good thing is that it contains  DSP as well :)


[0] Message Index

[*] Previous page

Go to full version