ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]   Go Down

Author Topic: EAW SB 1000e Subwoofer missing one port tubing - replacement?  (Read 5200 times)

Geert Friedhof

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 691
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #20 on: October 05, 2020, 08:29:56 PM »

Did you miss the video I posted that has the cabinet internal dimensions?

Are you sure the 1000Z has the same port dimensions as the 1000E?
Logged

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1221
    • Bad Quail
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #21 on: October 06, 2020, 12:14:25 PM »

Are you sure the 1000Z has the same port dimensions as the 1000E?

As far as I know, the boxes are the identical, drivers are different. e uses RCF, z uses B&C and the z series was made overseas not in USA. Either way, processor settings are the same, which leads me to believe that the two versions are interchangeable.

https://www.soundpro.com/catalog/documents/83694.pdf
Logged
Bad Quail
Sound + Light + Image
Joshua Tree, California
Authorized Dealer for all this stuff

doug johnson2

  • Full Member
  • ***
  • Offline Offline
  • Posts: 239
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #22 on: October 06, 2020, 01:46:24 PM »

The SB1000e and the z are the exact same cabinet with different drivers.  The e are RCF L18p300s and the z used a B&C, the model number escapes me at this time.  There were also some transition boxes that had 18sound drivers as well.
Logged

Rick Powell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 920
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #23 on: October 07, 2020, 09:07:26 AM »

Somebody should be able to 3D print an exact duplicate in polycarbonate if you can get them the correct dimensions.
Logged

Mike Henderson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 174
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #24 on: October 22, 2020, 08:21:04 AM »

Somebody should be able to 3D print an exact duplicate in polycarbonate if you can get them the correct dimensions.

So guys, we finally removed the woofers last night. The right side port tubing is made of cardboard and I am now understanding what about the "Inner Diameter" being 3-1/2" since the port hole itself is 3-1/2". Seems there is a lip around the port's hole to accommodate the 1/8" wall diameter and it is glued unto that lip. So now I can try to find a cardboard tubing with the dimensions since the missing left side port tube was not in the Cabinet.

Anyways, there were 2 screws missing so I will need to order those, they are hex screws.

Also, the attached is a pic of the woofer, I have written to EAW to confirm the specs of that woofer.
Logged

Matthew Knischewsky

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 635
  • Kitchener Ontario Canada
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #25 on: October 22, 2020, 12:17:50 PM »

So guys, we finally removed the woofers last night. The right side port tubing is made of cardboard and I am now understanding what about the "Inner Diameter" being 3-1/2" since the port hole itself is 3-1/2". Seems there is a lip around the port's hole to accommodate the 1/8" wall diameter and it is glued unto that lip. So now I can try to find a cardboard tubing with the dimensions since the missing left side port tube was not in the Cabinet.

Anyways, there were 2 screws missing so I will need to order those, they are hex screws.

Also, the attached is a pic of the woofer, I have written to EAW to confirm the specs of that woofer.

EAW 804059 = RCF L18-P300
Logged

Mike Henderson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 174
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #26 on: October 22, 2020, 01:04:48 PM »

EAW 804059 = RCF L18-P300

Yeah. This is the reply from EAW on the screws:

Quote
Hi Mike,

As I’ve said, there is no manufacturing in the USA any longer. So we are not a source for hardware.

Sincerely,

Any source to get those 2 missing screws please?
Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2201
  • Santa Fe, New Mexico
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #27 on: October 22, 2020, 01:12:59 PM »

Any source to get those 2 missing screws please?
A hardware store.
Bring a screw along so you can match the thread.
Logged

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1221
    • Bad Quail
Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #28 on: October 22, 2020, 07:09:16 PM »

Logged
Bad Quail
Sound + Light + Image
Joshua Tree, California
Authorized Dealer for all this stuff

ProSoundWeb Community

Re: EAW SB 1000e Subwoofer missing one port tubing - replacement?
« Reply #28 on: October 22, 2020, 07:09:16 PM »


Pages: 1 2 [3]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.046 seconds with 24 queries.