ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Help with old Jands Hog 500 Fixture Profiles  (Read 239 times)

Thane

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Help with old Jands Hog 500 Fixture Profiles
« on: July 21, 2020, 04:47:53 pm »

Greetings all.

Just found the forum. First post. I recently purchased a used Hog 500 console, 2 Vari-Lite VL2500s, 4 Vari-Lite VL3000s, and a couple of X-Laser Aurora Caliente units to play with. Nothing commercial... just living room and neighborhood holiday fun. I worked for a small production company and funded a few regional bands back in the day, so this is kinda like nostalgic COVID boredom therapy.

Before I dig into the HOG 500 fixture profile creation process and attempt it myself, I was hoping I might find an LD or tech who might have already built profiles for the VL2500 and VL3000 tucked away in an archive somewhere.  The ETC/HighEnd/Flying Pig support site has the fixture profiles I am looking for - but only for HOG 3 OS, not HOG 2 OS like what is in the 500 unit. The formats are vastly different unfortunately.

Any assistance or guidance would be greatly appreciated.

Thane
« Last Edit: July 21, 2020, 04:58:28 pm by Thane »
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6877
  • Audio Plumber
Posting Rules
« Reply #1 on: July 21, 2020, 05:05:19 pm »

Greetings all.

Just found the forum. First post.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
adm
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: July 21, 2020, 05:05:19 pm »


Pages: [1]   Go Up
 



Page created in 0.085 seconds with 23 queries.