ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: 3D Printed Custom Rack Ears (Pair) - Behringer and Midas X Air Digital Mixers  (Read 181 times)

Martin John Smith

  • Newbie
  • *
  • Offline Offline
  • Posts: 0
    • Seigi Design

If you're finding it difficult to get your hands on a pair of rack ears for your XR16 / XR18 / SD16 / and Midas MR16, MR18, XR12 or Midas MR12, I can help.

I designed these for a friend based on his use and it turns out they're popular.

How they differ from stock rack ears:
- Oversized holes in each bracket for tidy cable routing through to the front panel
- Extra mounting holes to allow the unit to be set further into the rack for better cable clearances.

Links here:
XR18/XR16: https://seigidesign.com/products/3d-printed-rack-ears-pair-behringer-digital-mixer-xr16-xr18-sd16-and-midas-mr16-mr18
and
XR12: https://seigidesign.com/products/custom-3d-printed-rack-mount-ears-pair-behringer-xr12-midas-mr12-digital-mixers


Logged

ProSoundWeb Community


Pages: [1]   Go Up
 



Page created in 0.069 seconds with 24 queries.