ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: X32, S32 and reaper  (Read 494 times)

Aaron Coley

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
X32, S32 and reaper
« on: May 04, 2020, 11:13:38 am »

I'm new to the forum and new to reaper. Pretty much everything is working as it should except a couple things. First question is, I have the routing setup as local 1-8 on the x32 and 9-32 on the s16. So for example, let's say channel 25 on the s-16 has been sourced to channel 6 on the x32. Reaper doesn't recognize that. Is the only way to have it sourced 25-25? My second question is, a guitar track had been recorded through x32 into reaper and I want to play it back and record another track that would be vocals, then drums and etc.. how do you play it back to lay down new tracks with it.
Thanks for any help!
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6998
  • Audio Plumber
Posting Rules
« Reply #1 on: May 04, 2020, 05:17:41 pm »

I'm new to the forum and new to reaper.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: May 04, 2020, 05:17:41 pm »


Pages: [1]   Go Up
 



Page created in 0.017 seconds with 20 queries.