ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Route a matrix to card out?  (Read 430 times)

Farrell Clark

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Route a matrix to card out?
« on: March 17, 2020, 02:47:30 pm »

We are looking to feed a livestream mix to a laptop.  I have a matrix set up with the main l/r being sent to it, as well as a mix bus to boost things for the livestream that aren't up in the house.  I've had people tell me I can just send the feed to the computer via the USB out on the X32, rather than having to buy a separate USB interface.  I'm just not sure how I route that - there's no matrixes on the card out routing page so I'm not sure how to get it to do what we're wanting.  Am I missing something or is it not possible?
Logged

Andrew Hollis

  • Full Member
  • ***
  • Offline Offline
  • Posts: 120
Re: Route a matrix to card out?
« Reply #1 on: April 07, 2020, 06:20:34 pm »

Their routing scheme is a bit confusing.

The bus outs (matrix) are found on the OUTPUT 1-16 tab.
The USB card is found on the CARD OUTPUT tab.

The CARD OUTPUT devices are mirrors what you do on the OUTPUT 1-16 tab.

So on OUTPUT you route matrix to 1-6 for example, then on CARD tab you route 1-6 to the CARD.

I believe that's how it works.

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2548
  • HeyYahWon! ttsss! ttsss!
Re: Route a matrix to card out?
« Reply #2 on: April 07, 2020, 09:57:37 pm »

Their routing scheme is a bit confusing.

The bus outs (matrix) are found on the OUTPUT 1-16 tab.
The USB card is found on the CARD OUTPUT tab.

The CARD OUTPUT devices are mirrors what you do on the OUTPUT 1-16 tab.

So on OUTPUT you route matrix to 1-6 for example, then on CARD tab you route 1-6 to the CARD.

I believe that's how it works.

Essentially true.  You can route things in groups of 8 to the 32 "card" outputs [USB].  So you can route your "Outputs" 1- 8 to say Card out 1-8 and the USB will mirror your outputs.  If you want something other than a mirror you can route your Ultranet outputs to the card outputs and then assign any combination of inputs or mixbusses to Ultranet.
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
bdmaudio@gmail.com

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

ProSoundWeb Community

Re: Route a matrix to card out?
« Reply #2 on: April 07, 2020, 09:57:37 pm »


Pages: [1]   Go Up
 



Page created in 0.053 seconds with 25 queries.