ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Use an AT headset or lav mic with a ULXD1?  (Read 1007 times)

Kirby Yarbrough

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 513
  • Reston, Virginia
Use an AT headset or lav mic with a ULXD1?
« on: April 01, 2020, 10:28:33 AM »

If I can find the right adaptor (4-pin Hirose (male) to TA4M), can I use an Audio Technica lav or headset mic with a ULXD1?
Logged

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3391
    • HappyMac Digital Electronics
Re: Use an AT headset or lav mic with a ULXD1?
« Reply #1 on: April 01, 2020, 10:51:55 AM »

If I can find the right adaptor (4-pin Hirose (male) to TA4M), can I use an Audio Technica lav or headset mic with a ULXD1?

I've used them with the QLX version.  I'd assume that the ULX is the same.
Logged
Brian Jojade

ProSoundWeb Community

Re: Use an AT headset or lav mic with a ULXD1?
« Reply #1 on: April 01, 2020, 10:51:55 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 22 queries.