ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: DiGiCo webinars on FB starting 3/24/2020  (Read 4542 times)

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
DiGiCo webinars on FB starting 3/24/2020
« on: March 23, 2020, 11:34:29 AM »

Hi Fellas
        Wanted to share that we will be starting a webinar series on our DiGiCo Facebook page and the first one will be hosted by product specialist Dan Page and will be focused on the new Quantum 338. This will also include question and answer period towards the end.
Hope you are all healthy and safe. Look forward to getting back to entertaining our fans soon, they are gonna need it !!!

Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #1 on: March 24, 2020, 10:38:32 AM »

Hi Fellas
        Wanted to share that we will be starting a webinar series on our DiGiCo Facebook page and the first one will be hosted by product specialist Dan Page and will be focused on the new Quantum 338. This will also include question and answer period towards the end.
Hope you are all healthy and safe. Look forward to getting back to entertaining our fans soon, they are gonna need it !!!

coming up again at 12:30pm EST

Click here: bit.ly/2UxUgjb
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23741
  • Wichita, Kansas USA
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #2 on: March 24, 2020, 10:57:40 AM »

I understand the appeal of FB, but will there be an alternative for those of us who view FB as a spy tool?
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Ike Zimbel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1057
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #3 on: March 24, 2020, 11:27:20 AM »

I understand the appeal of FB, but will there be an alternative for those of us who view FB as a spy tool?
+1
Logged
~Ike Zimbel~
Wireless frequency coordination specialist and educator.
Manufacturer's Representative (Canada)
Radio Active Designs
Pro Audio equipment repair and upgrades.
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Riley Casey

  • Hero Member
  • *****
  • Online Online
  • Posts: 2068
  • Wash DC
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #4 on: March 24, 2020, 03:36:44 PM »

Hate to break it to you Tim but the entire web is a spy tool but yes, some worse than others.   :-\

I understand the appeal of FB, but will there be an alternative for those of us who view FB as a spy tool?

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23741
  • Wichita, Kansas USA
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #5 on: March 24, 2020, 04:15:18 PM »

Hate to break it to you Tim but the entire web is a spy tool but yes, some worse than others.   :-\
I agree.  I keep one machine that is never used to access anything Google/youtube,gmail, etc.  I use NoScript to keep their scripts from spying.  I block Facebook, Instagram and their social brothers and sister at the source as untrusted.  I see a very different set of advertising (and on line prices from some merchants) compared to a machine that I allow Google and related things to run on.

Am I "anonymous"?  Of course not.  But that I notice differences is not surprising to me.  At any rate, I've managed to almost make it to retirement without social media, and I'm trying to continue doing so.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Miguel Dahl

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #6 on: March 24, 2020, 04:31:07 PM »

I agree.  I keep one machine that is never used to access anything Google/youtube,gmail, etc.  I use NoScript to keep their scripts from spying.  I block Facebook, Instagram and their social brothers and sister at the source as untrusted.  I see a very different set of advertising (and on line prices from some merchants) compared to a machine that I allow Google and related things to run on.

Am I "anonymous"?  Of course not.  But that I notice differences is not surprising to me.  At any rate, I've managed to almost make it to retirement without social media, and I'm trying to continue doing so.

I've turned off google ad tracking and I also don't see much personalized ads, it's an option.  You can also just use Tor as browser, or DuckDuckGo as search engine.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23741
  • Wichita, Kansas USA
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #7 on: March 24, 2020, 05:31:43 PM »

I've turned off google ad tracking and I also don't see much personalized ads, it's an option.  You can also just use Tor as browser, or DuckDuckGo as search engine.

I have my google privacy settings as tight as I can get them.  I use Duck first and only use G if I can't find what I want.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7530
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #8 on: March 25, 2020, 12:40:12 AM »

I have my google privacy settings as tight as I can get them.  I use Duck first and only use G if I can't find what I want.


Install virtual machine software (many are free).  Spin up a VM then just delete ot when done.  Takes about 30 seconds.  Any virus or other crap you pickup can't touch the host system.
Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #9 on: March 25, 2020, 12:13:42 PM »

I understand the appeal of FB, but will there be an alternative for those of us who view FB as a spy tool?

Hi Tim
     I understand and I will post direct links but the Q & A will only be available live I am afraid. Also for those interested I also am involved in US support for Klang 3D immersive Ear Monitoring and will as well follow up with the links post FB live webinars for any one interested in learning during this crazy downtime.
 Best Regards and stay safe.
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #10 on: March 25, 2020, 12:28:07 PM »

Hi Fellas
        Wanted to share that we will be starting a webinar series on our DiGiCo Facebook page and the first one will be hosted by product specialist Dan Page and will be focused on the new Quantum 338. This will also include question and answer period towards the end.
Hope you are all healthy and safe. Look forward to getting back to entertaining our fans soon, they are gonna need it !!!
Hi Fellas
          Here is a link to yesterdays DiGiCo webinar about the Q338 and the Quantum processing available to view via DropBox.
 
https://www.dropbox.com/s/vkuqau19w66cjz7/Dan%20Live%2020-03.mp4?dl=0
Best Regards!
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23741
  • Wichita, Kansas USA
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #11 on: March 25, 2020, 03:50:45 PM »

Hi Fellas
          Here is a link to yesterdays DiGiCo webinar about the Q338 and the Quantum processing available to view via DropBox.
 
https://www.dropbox.com/s/vkuqau19w66cjz7/Dan%20Live%2020-03.mp4?dl=0
Best Regards!

Thanks, Chip!  The accommodation is greatly appreciated.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #12 on: March 30, 2020, 08:56:34 AM »

Thanks, Chip!  The accommodation is greatly appreciated.

for anyone interested there is another KLANG webinar this morning at 11am EST on their FB page.
https://www.facebook.com/klangtechnologies/videos/613474675873659/
Hope all are staying safe and healthy!
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #13 on: April 15, 2020, 11:56:40 AM »

for anyone interested there is another KLANG webinar this morning at 11am EST on their FB page.
https://www.facebook.com/klangtechnologies/videos/613474675873659/
Hope all are staying safe and healthy!

Hi Fellas
Hope all are doing well in these crazy times. Wanted to share the link to our youtube page where we are sharing new training videos a few times per week as we  go live. As well we will be hosting another Q & A this Friday evening live on our DiGiCo FB page for anyone who would like to join in as there will be software, tech support, sales and training teams all present to answer.

https://www.youtube.com/user/digicoconsoles

Best Regards
Chip Sciacca
Group One
DiGiCo Tech Support Engineer USA
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #14 on: April 24, 2020, 10:55:11 AM »

Hi Fellas
    Hope all hanging in there! DiGiCo FB live Q&A today at 2pm will be featuring a few top engineers from the business again. If you are not on FB and wanted to catch this we will be adding it to our DiGiCo youtube channel about a day after it airs live which is today at 2PM EDT.
Be safe everyone !




Hi Fellas
Hope all are doing well in these crazy times. Wanted to share the link to our youtube page where we are sharing new training videos a few times per week as we  go live. As well we will be hosting another Q & A this Friday evening live on our DiGiCo FB page for anyone who would like to join in as there will be software, tech support, sales and training teams all present to answer.

https://www.youtube.com/user/digicoconsoles

Best Regards
Chip Sciacca
Group One
DiGiCo Tech Support Engineer USA
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #15 on: April 29, 2020, 01:53:05 PM »

Here is the link for the event,  Wednesday April 29th at 1pm central.   Free to sign up and is running on youtube.

https://www.eventbrite.com/e/digico-masters-series-digital-audio-protocols-tickets-103174365304


Also coming this Friday May 1 to our "Ask us Anything" Q & A on Facebook Live is Guests James Gordon and John Stadius !
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #16 on: May 07, 2020, 01:03:13 PM »

Hi Fellas
           Today we are hosting on our YouTube Live page a full product tour starting at 2pm East.
Hope all are doing well !

https://www.eventbrite.com/e/digico-masters-series-product-tour-webinar-live-tickets-104340589512?fbclid=IwAR2CRMrY7bhfJOE2DEVG99JK0Ba-iBeF7AlE_Vgq_7vKXvHvCoC4ZNCl69I
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

Chip Sciacca

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #17 on: May 13, 2020, 09:09:50 AM »

Hi Fellas
        Hope we are all are dealing with this as best as possible. I have here another DiGiCo Live event today at 1pm Eastern focused the new Quantum Processing. Please feel free to pop on over, ask a question or just get distracted for an hour or two on this ...Day!  Again this event is live on the DiGiCo official FaceBook page and will then go up tomorrow on our DiGiCo official YouTube page.
Best Regards!







Hi Fellas
           Today we are hosting on our YouTube Live page a full product tour starting at 2pm East.
Hope all are doing well !

https://www.eventbrite.com/e/digico-masters-series-product-tour-webinar-live-tickets-104340589512?fbclid=IwAR2CRMrY7bhfJOE2DEVG99JK0Ba-iBeF7AlE_Vgq_7vKXvHvCoC4ZNCl69I
Logged
Tech Support Engineer
Group One Ltd.
DiGiCo USA
Klang USA

ProSoundWeb Community

Re: DiGiCo webinars on FB starting 3/24/2020
« Reply #17 on: May 13, 2020, 09:09:50 AM »


Pages: 1 2 [All]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 22 queries.