Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mathew Saturnino]

Good morning.

I'm the FOH tech at Revival in Toronto. We're running an EV X-Line Advance PA, and upgrading our wireless mic fleet at the venue.

I have recently purchased 4 x EW500G4 935 kits with 2 x directional antennae and 1 x ASA214 splitter.

My question is, I would like to run WSM to monitor the mics from FOH. I do have 4 CAT6 lines on stage, 2 run to FOH and 2 run to my amp/server room (where my amps connect into the network, they're TG7 amps with RCM28 OMNEO network cards).

In order for me to get these mics on the network, can I run them through a 5-port switch to get them onto the network at the venue? If so, does the switch need to be managed or can an unmanaged switch work for this application?

Thanks for your assistance in advance.

[Keith Broughton]

I do not think you need a managed switch.

[Ike Zimbel]

I do not think you need a managed switch.

+1. I think any switch will do.

[ProSoundWeb Community]