Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Zach Geist]

Hello all,

I am looking for a solderless rack feedthru for DMX, similar to Neutrik's NA3FDM where it is female to male or male to female and no solder points.

Has anyone encountered a manufacturer that makes such a thing?

I have found Neutrik's NC5FDM3-H-PCB-RJ45 which could accomplish what I'm looking for by using a RJ45 to DMX cable, but is not ideal.

Thank you all!
Zach

[Paul G. OBrien]

I am looking for a solderless rack feedthru for DMX, similar to Neutrik's NA3FDM where it is female to male or male to female and no solder points.

So.. why not use the NA3FDM? Or do you need 5-pin?

[Jeff Lelko]

If screw terminals will work I've seen both the 3 pin and 5 pin versions with terminals instead of solder cups.  Why the need for solderless?  If done right a soldered connection will be superior to a pass-through.  Hope this helps!

[Zach Geist]

If screw terminals will work I've seen both the 3 pin and 5 pin versions with terminals instead of solder cups.  Why the need for solderless?  If done right a soldered connection will be superior to a pass-through.  Hope this helps!

Rack is designed to be somewhat 'modular' so I'm trying to make it easier to add/remove panels without pulling out a lump of cable tails with it. I am still interested in the screw terminal 5-pin though, happen to have a link?

[Zach Geist]

So.. why not use the NA3FDM? Or do you need 5-pin?

Need 5 pin :/

[Jeff Lelko]

Rack is designed to be somewhat 'modular' so I'm trying to make it easier to add/remove panels without pulling out a lump of cable tails with it. I am still interested in the screw terminal 5-pin though, happen to have a link?

Yep, here you go!  (Link)

They come in a few different flavors and definitely aren't cheap, but if this is what you want it should do the job.  Good luck!

[Scott Hofmann]

http://www.bpesolutions.com/dmxproduct.html#anchor1882520

[ProSoundWeb Community]