ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Digital beltpacks and older lav/headsets  (Read 327 times)

Brad Harris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
Digital beltpacks and older lav/headsets
« on: March 02, 2020, 05:45:26 pm »

Countryman have added a circuit to their mics to help with noise reduction with digital transmissions, same with Shure with a different cable ...




As we're moving away from analogue transmissions, Is there any consensus on what one could do with older lavs and headsets to avoid inducing the signal pickup? (Thinking older CM311 headsets)




Thanks!


Brad
Logged

Ike Zimbel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 568
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: Digital beltpacks and older lav/headsets
« Reply #1 on: March 02, 2020, 07:58:05 pm »

Countryman have added a circuit to their mics to help with noise reduction with digital transmissions, same with Shure with a different cable ...




As we're moving away from analogue transmissions, Is there any consensus on what one could do with older lavs and headsets to avoid inducing the signal pickup? (Thinking older CM311 headsets)




Thanks!


Brad
Yes, there's another thread about this here, somewhere, and I have an article coming out about it on PSW this month...maybe even this week. I will try and find the other thread.
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)

Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

Brad Harris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
Re: Digital beltpacks and older lav/headsets
« Reply #2 on: March 03, 2020, 11:22:53 am »

Thanks Ike,


Been away for a while, so haven't seen the thread your talking about.. and my forums search skills are pretty primitive.

Only thing I can find is Shure endorsing their 'newer' Commshield technology, which doesn't help much...


Brad
Logged

Ike Zimbel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 568
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: Digital beltpacks and older lav/headsets
« Reply #3 on: March 05, 2020, 05:03:05 pm »

Thanks Ike,


Been away for a while, so haven't seen the thread your talking about.. and my forums search skills are pretty primitive.

Only thing I can find is Shure endorsing their 'newer' Commshield technology, which doesn't help much...


Brad
And here's the new article: https://www.prosoundweb.com/modern-problems-issues-when-mixing-analog-digital-wireless-systems/
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)

Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

ProSoundWeb Community

Re: Digital beltpacks and older lav/headsets
« Reply #3 on: March 05, 2020, 05:03:05 pm »


Pages: [1]   Go Up
 



Page created in 0.032 seconds with 23 queries.