ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Small light show control  (Read 1111 times)

Paul G. OBrien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1065
Re: Small light show control
« Reply #10 on: April 26, 2020, 02:25:14 pm »

Robert... you will likely want 4 receivers for that setup.. 1 for each stand, and the heads will be linked in DMX mode not master/slave which may or may not give you access to the stand alone programs built into the fixtures.
Logged

Dave Garoutte

  • Hero Member
  • *****
  • Online Online
  • Posts: 2250
  • San Rafael, CA
Re: Small light show control
« Reply #11 on: April 26, 2020, 05:16:05 pm »

Using wireless DMX is basically like a splitter, one Tx to many Rx.
Each Rx can feed one or a number of wired fixtures.
One per tree, and one per group of ground fixtures.
Balance the reliability of wired against the convenience and practicality of wireless.
If you want individual control, you will still need unique addresses for each fixture, because they are still on the same universe.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.  And now, Streaming Video!

ProSoundWeb Community

Re: Small light show control
« Reply #11 on: April 26, 2020, 05:16:05 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.054 seconds with 22 queries.