ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Shure power supply  (Read 914 times)

Clint Ball

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Shure power supply
« on: February 29, 2020, 06:32:39 PM »

Hi, can anybody advise me on the following, I have purchased a second hand Shure UA844 the problem is that it was supplied with a shure PS40UK power supply, the correct power supply would be a PS45UK or the up to date PS60UK, Shure say that I need either the 45 or 60, but I guessed they would, can anybody tell me if the PS40 will work ok and not cause problems, I know Shure would only advise on the correct item but they are so expensive.
Many thanks.
Logged

Russell Ault

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2514
  • Edmonton, AB
Re: Shure power supply
« Reply #1 on: February 29, 2020, 06:55:18 PM »

Hi, [...]

Welcome!

[...] can anybody advise me on the following, [...]

Not until you comply with the forum rules. Specifically, your Display Name must be you full, real name.

This thread will probably be locked until you do.

-Russ
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7562
  • Audio Plumber
Posting Rules
« Reply #2 on: February 29, 2020, 08:11:21 PM »

Hi, can anybody advise me

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #2 on: February 29, 2020, 08:11:21 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.038 seconds with 25 queries.