ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: X32 Routing Questions  (Read 183 times)

Rick Bennevendo

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
X32 Routing Questions
« on: February 06, 2020, 05:00:24 pm »

Hi - I'm a newbie at this and have some pretty basic questions. I have included a diagram to show what I want to achieve. My setup will be
two SD8's - one on the left side of the building and one on the right side of the building. They will be connected to AES-50 A & B at
the X32 digital mixer. The left one (A) will feed the left house speaker and two floor monitors and the right one (B) will feed the right
house speaker and two floor monitors. I will only be using input channels 1 through 16 on the mixer; 1-8 being fed from SD-8(A), and 9-16
fed from SD-8 (B).

So...do I setup the inputs as AES50 A1-8 for the left SD8 (A), and AES50 B9-16 for the right SD8 (B)?
   With this setup (if it's even correct) could I use only channel 16 as a local input for a wireless mic receiver?

How do I set up the outputs on the X32 for the SD8s (A&B) to feed my monitors and house speakers - specifically my L/R outputs to the L/R house (main) speakers.

Thanks!
Rick
Logged

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2068
  • San Rafael, CA
Re: X32 Routing Questions
« Reply #1 on: February 06, 2020, 06:21:28 pm »

You MUST use your full real name before anyone will answer, per the forum rules.
Also, this should be in the lounge, not reviews.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.

ProSoundWeb Community

Re: X32 Routing Questions
« Reply #1 on: February 06, 2020, 06:21:28 pm »


Pages: [1]   Go Up
 



Page created in 0.067 seconds with 22 queries.