ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Shut down LED fixtures or just zero them out and leave powered up?  (Read 1421 times)

Steve-White

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 260
  • Fort Worth
Re: Shut down LED fixtures or just zero them out and leave powered up?
« Reply #20 on: January 25, 2020, 04:56:03 pm »

.
We have DMX controlled stage lighting-it's all fed from one 60 amp 3 phase panel.  My plan this spring is to use an inexpensive Northlight DMX relay to control a contactor that will power that entire panel down when the DMX control is off.

Like the others, I am leary of powerline issues when the system is not in use.  Knock on wood, but I have our media booth set up so that it is physically disconnected when not in use-in spite of being in Iowa with plenty of thunderstorms we haven't had any issues.

The smart way to do it.
Logged

Jamin Lynch

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1964
  • Corpus Christi, TX.
Logged
MAGA-Make Audio Great Again

Luke McCready

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Shut down LED fixtures or just zero them out and leave powered up?
« Reply #22 on: February 06, 2020, 07:25:04 pm »

Fascinating discussion. Thank you!
Logged

ProSoundWeb Community

Re: Shut down LED fixtures or just zero them out and leave powered up?
« Reply #22 on: February 06, 2020, 07:25:04 pm »


Pages: 1 2 [3]  All   Go Up
 



Page created in 0.062 seconds with 22 queries.