ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Low cost antenna distribution  (Read 315 times)

John Woodfield

  • Lab Lounge
  • Full Member
  • *
  • Offline Offline
  • Posts: 185
Low cost antenna distribution
« on: January 15, 2020, 08:10:06 pm »

Looking for 24 channels wide-band UHF. Lowest I have found is around $2k. Before I go that route, anyone have any other options? I would prefer not to daisy chain.
Logged

Ben Lawrence

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 53
    • VT AUDIO VISUAL
Re: Low cost antenna distribution
« Reply #1 on: January 15, 2020, 09:01:37 pm »

Check out the RF Venue stuff. Might require daisy chaining. The Rf distro is not really cheap but assuming each of your wireless is in the 1k range and you have 24 units whats another 2k  ;D
https://www.rfvenue.com/
« Last Edit: January 15, 2020, 09:04:14 pm by Ben Lawrence »
Logged

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1442
Re: Low cost antenna distribution
« Reply #2 on: January 15, 2020, 10:20:46 pm »

Ebay.  There really isn't much to go wrong with an antenna distro.

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3257
  • Toronto
Re: Low cost antenna distribution
« Reply #3 on: January 16, 2020, 06:36:18 am »

Looking for 24 channels wide-band UHF. I would prefer not to daisy chain.
As suggested by ( Henry..I think) start with a high quality passive 3 way splitter into the 3, 8 ch active distros.
I can't remember the specific device but it was from Mini Circuits.
Logged
I don't care enough to be apathetic

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1442
Re: Low cost antenna distribution
« Reply #4 on: January 16, 2020, 09:57:14 am »

These are the mini-circuit splitters we use ZFSC-3-1W+ .  One thing of note is that you do need to load all three output ports on the splitter. It gets very peculiar when using a three way split as a two way.  We use the basic Shure two way splitters for that.

As suggested by ( Henry..I think) start with a high quality passive 3 way splitter into the 3, 8 ch active distros.
I can't remember the specific device but it was from Mini Circuits.

ProSoundWeb Community

Re: Low cost antenna distribution
« Reply #4 on: January 16, 2020, 09:57:14 am »


Pages: [1]   Go Up
 



Page created in 0.061 seconds with 24 queries.