ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PSM 1000 receiver RF options  (Read 224 times)

Gian Luca Cavalliini

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
    • Live on Stage
PSM 1000 receiver RF options
« on: January 17, 2020, 02:04:22 pm »

1) RF menu of P10R allows use of just antenna 1, 2, both.
Just for testing? Or maybe I'm missing other useful applications?

2) Anybody had the opportunity to accurately measeure bodypack antennas? I think 72MHz of bandwidth flat response is rather difficult to provide... Just in case I usually try to use center range for longer run, but I'd like to know better :-)

3) Are there any SMA in line passband filter? I didn't find from MiniCircuit...

Thanx!
Logged
Short coffee, SHORT coffee, more SHORT coffee... yes, I'm from Italy!

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1661
    • Check Check One Two
Re: PSM 1000 receiver RF options
« Reply #1 on: January 17, 2020, 07:48:51 pm »

1) RF menu of P10R allows use of just antenna 1, 2, both.
Just for testing? Or maybe I'm missing other useful applications?
I use it for testing that both antennas are working. I've seen several antennas where the little pin is not connecting or is broken off in the antenna.
It's unfortunate that the display doesn't show which antenna is active without having to go into the menu and disabling one or the other.
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

ProSoundWeb Community

Re: PSM 1000 receiver RF options
« Reply #1 on: January 17, 2020, 07:48:51 pm »


Pages: [1]   Go Up
 



Page created in 0.139 seconds with 25 queries.