ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Flight Case Manufacturer in Canada  (Read 559 times)

Chris Poynter

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 88
    • www.chrispoynter.ca
Flight Case Manufacturer in Canada
« on: January 14, 2020, 12:23:36 pm »

Hey everyone, I'm looking for a reputable flight case manufacturer in CANADA who can make me rolling cases for my JBL SRX 818sp subs.

Mods⁠—feel free to move this to a different board if I'm posting in the wrong place.  :)

Thanks everyone!

Taylor Hall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 842
Re: Flight Case Manufacturer in Canada
« Reply #1 on: January 14, 2020, 12:49:52 pm »

FWIW, making your own isn't a huge undertaking, so if you have access to one to use as a template of sorts you can save some serious cash. The most specialized tool in the whole process is a rivet gun which you can get for $30, and parts are abundant online. We recently did this for some projector cases and came in at 1/3 the cost of having a local shop do it (even factoring in labor) and you'd never tell the difference.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Steve Ferreira

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 373
Re: Flight Case Manufacturer in Canada
« Reply #2 on: January 14, 2020, 01:03:48 pm »

Hey everyone, I'm looking for a reputable flight case manufacturer in CANADA who can make me rolling cases for my JBL SRX 818sp subs.

Mods⁠—feel free to move this to a different board if I'm posting in the wrong place.  :)

Thanks everyone!

ECM   http://www.engineeredcase.com/

Logged

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1725
    • Check Check One Two
Re: Flight Case Manufacturer in Canada
« Reply #3 on: January 14, 2020, 01:12:46 pm »

You're in BC?
https://www.dinosaurcases.com
Long & McQuade also sells flight cases.
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Chris Poynter

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 88
    • www.chrispoynter.ca
Re: Flight Case Manufacturer in Canada
« Reply #4 on: January 14, 2020, 01:15:48 pm »

FWIW, making your own isn't a huge undertaking, so if you have access to one to use as a template of sorts you can save some serious cash. The most specialized tool in the whole process is a rivet gun which you can get for $30, and parts are abundant online. We recently did this for some projector cases and came in at 1/3 the cost of having a local shop do it (even factoring in labor) and you'd never tell the difference.

Good idea!

You're in BC?
https://www.dinosaurcases.com
Long & McQuade also sells flight cases.

Thanks for the tip. I actually just found Dinosaur Cases online and emailed them.

You're right about L&M; however, there doesn't seem to be an existing case for these specific subs so I think I have to go custom.

Dave Scarlett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 309
Re: Flight Case Manufacturer in Canada
« Reply #5 on: January 20, 2020, 06:21:35 pm »

Great guys here:

https://tchweb.com
Logged

Russell Ault

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 707
  • Edmonton, AB
Re: Flight Case Manufacturer in Canada
« Reply #6 on: January 21, 2020, 12:28:07 am »

Hey everyone, I'm looking for a reputable flight case manufacturer in CANADA who can make me rolling cases for my JBL SRX 818sp subs.

Just a thought: Canada's a pretty big place, and shipping can be expensive. The last time I had a one-off case built I found that the overall cheapest manufacturer was the one located close enough for pick-up.

-Russ
Logged

ProSoundWeb Community

Re: Flight Case Manufacturer in Canada
« Reply #6 on: January 21, 2020, 12:28:07 am »


Pages: [1]   Go Up
 



Page created in 0.053 seconds with 25 queries.