ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Converting Raw wire pins to Speakon in my Grundorf dual 18"s  (Read 774 times)

maxarvzoo

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Converting Raw wire pins to Speakon in my Grundorf dual 18"s
« on: January 09, 2020, 10:23:31 PM »

I have two grund dual 18" sub boxes, I believe they were from an old club install because they are shaped with an extremely low profile and have 2 pin, raw wire connections in the back. I am using these with a mobile rig and would love any advice on where to start as far as learning how to replace the 2 pin connection with speakon ports. Thanks in advanced!


M.
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7566
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Converting Raw wire pins to Speakon in my Grundorf dual 18"s
« Reply #1 on: January 09, 2020, 11:47:41 PM »

I have two grund dual 18" sub boxes, I believe they were from an old club install because they are shaped with an extremely low profile and have 2 pin, raw wire connections in the back. I am using these with a mobile rig and would love any advice on where to start as far as learning how to replace the 2 pin connection with speakon ports. Thanks in advanced!


M.


You need to start by following the rules displayed when you signed up. 


Your display name in your peofile must be your real, verifiable name.


Until you comply we can't help.
Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7563
  • Audio Plumber
Posting Rules
« Reply #2 on: January 10, 2020, 07:57:14 AM »

I have two grund dual 18" sub boxes, I believe they were from an old club install because they are shaped with an extremely low profile and have 2 pin, raw wire connections in the back. I am using these with a mobile rig and would love any advice on where to start as far as learning how to replace the 2 pin connection with speakon ports. Thanks in advanced!


M.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #2 on: January 10, 2020, 07:57:14 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.044 seconds with 25 queries.