ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 [4]   Go Down

Author Topic: Mesh Access Point for Dummies  (Read 1900 times)

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3512
  • Boston Metro North/West
    • Lynx Audio Services
Re: Mesh Access Point for Dummies
« Reply #30 on: January 29, 2020, 11:59:17 am »

Well, the answers are here. Like the X Files, the truth is out there.  And the reality is that you don't need a Mesh, you need a decent WAP.  Use fixed IP addresses and the EnGenius ENS500ext or it's current equivalent.  5gHz, very good range if you put it up on a speaker or mic stand and get it overhead.  Simpler to configure than any of the Ubiquity Networks gear.

I agree he doesn’t need the mesh function but just using it as a single WAP makes the learning worthwhile.
It is powered via POE
It mounts nice for a tall stand
It is weather proof

Just my $0.02
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

ProSoundWeb Community

Re: Mesh Access Point for Dummies
« Reply #30 on: January 29, 2020, 11:59:17 am »

Pages: 1 2 3 [4]   Go Up

Page created in 0.036 seconds with 23 queries.