Some good questions everyone! Here's some more details.
Bar/nightclub divided into three sections. The main two indoor areas are the main bar room the dance floor room which are separated by a brick wall. The third area is a large L-shaped patio with an outdoor stage. The stage will have its own separate sound system brought in by the band/sound company. An output from that will also feed into the main system.
The idea is to be able to route audio from anywhere to anywhere. For instance, the DJ on the bar and dance floor, the band outside, and the traveling mics through all three areas.
Some of these runs are long and somewhat difficult to do which is why I want to go the Dante route. It's much easier to pull one fiber line than a bunch of analog. Dante will also allow a lot of flexibility.
I would need the basic feedback fighting tools in whatever I used to perform these functions.
I forgot I wouldn't have HA control through Dante on the M32R so I feel that takes it out of consideration. Thanks for that catch!
I'll look into some DSP options. The owner is leaning towards a small Danley rig with the SC48 processor. What else could I use to do simple mixing and routing that has Dante?
Thanks everyone!