ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PRX418S  (Read 324 times)

Michale Whitney

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
PRX418S
« on: November 10, 2019, 12:30:09 am »

So I bought a pair of new PRX418S subs and compaired to my JRX 218S's the JRX's give me way more thump! I am running the JRX218's each from Carvin HD1500 amps bridged at 900 watts each. The PRX418S's are each running off Samson SX2400 power amps bridged at 1500 watts per sub. The old JRX's give me way more thump. THe PRX418's just sound muddy... I cross over at about 80 - 100 on the JRX.s and Have tried several crossover points for the PRX's starting with the factory suggested 80htz. When I use the SRX subs I also pair them with a pair of SRX 815's powered with a new Peavey IPR 7500... I have tried different amps and have setteled on the old boat anchors because I just hate the new class D amps! They just dont give the push that old amps push! So my question is how do I get the THUMP out of the new PRX418's??? BTW Grateful Dead Jam Band using a mackie prov2 with onboard EQ...
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6824
  • Audio Plumber
Posting Rules
« Reply #1 on: November 10, 2019, 12:43:58 am »

So I bought a pair of new PRX418S subs

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: November 10, 2019, 12:43:58 am »


Pages: [1]   Go Up
 



Page created in 0.054 seconds with 22 queries.