ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Ask Jonah: The Differences Between A Subgroup And A VCA  (Read 2920 times)

Ernie Black

  • Administrator
  • Newbie
  • *****
  • Offline Offline
  • Posts: 24
    • Standing Stone Designs
Ask Jonah: The Differences Between A Subgroup And A VCA
« on: August 02, 2018, 10:19:38 AM »

Ask Jonah: The Differences Between A Subgroup And A VCA
The difference between VCAs and subgroups becomes important when we have individual channels routed to different destinations.
By Jonah Altrove • Posted in Reading Room on August 2, 2018

Dear Jonah:

What’s the difference between a subgroup and a VCA? – Anonymous



In a word? Summing. Think about a mixing console for a second – a bunch of inputs enter and get all summed together into a single stereo signal, the level of which can be adjusted with the master fader. A subgroup is the same idea: everything you route to it gets summed together, and the resulting signal can be controlled with the group fader and routed somewhere.

A VCA (voltage controlled amplifier, or its digital incarnation, DCA) also provides level control, but without summing everything together. This is why VCAs are referred to as Control Groups by at least one major console manufacturer. They’re just controlling the signal levels, not summing them or routing them or anything else.

Read full article on PSW: Ask Jonah the Differences between a Subgroup and a VCA
« Last Edit: August 02, 2018, 06:30:07 PM by Keith Clark »
Logged
Code Warrior of the Seven Galaxies
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 21 queries.