ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 [4]   Go Down

Author Topic: Digico S21/S31  (Read 16331 times)

Dennis Muller

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Digico S21/S31
« Reply #30 on: March 12, 2018, 10:17:05 pm »

I just downloaded the offline editor for the S21/31 and can't find the layer buttons like on SD series offline. Am I missing something?

Use the Up/Down arrow keys to move between layers within the editor.
Logged

Steve Ferreira

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 373
Re: Digico S21/S31
« Reply #31 on: March 13, 2018, 11:36:00 am »

Use the Up/Down arrow keys to move between layers within the editor.

Thanks you sir
Logged

Baba Z. Buerger

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Digico S21/S31
« Reply #32 on: October 28, 2019, 11:09:27 am »

Hi. I have 2 questions that were probably discussed here, but I'm new so here I go:
1. where can I invert the polarity of an input channel (reverse phase) ?
2. As many wondered before me- can't I have the gate before the compressor in the processing chain?  If not- thats would suck big time.

Thanks.
Logged

Geert Friedhof

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 639
Re: Digico S21/S31
« Reply #33 on: October 28, 2019, 11:53:55 am »

First: Polarity is not phase, inversed or not.

Second: The gate is always before the compresor, but after the highpass. You can switch the order between eq and compresor.

Third: Do you see the knop next to the phantom (+48) button, labeled with a crossed zero? That is your polarity button, as it is on nearly every other desk...
Logged

ProSoundWeb Community

Re: Digico S21/S31
« Reply #33 on: October 28, 2019, 11:53:55 am »


Pages: 1 2 3 [4]   Go Up
 



Page created in 0.047 seconds with 23 queries.