ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Do I need a crossover  (Read 197 times)

Clayton James

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Do I need a crossover
« on: October 20, 2019, 11:45:52 am »
I’m new to running sound so I really could use some help. I’m using a Behringer xr18 mixer with two Cerwin Vega cve powered 12 and cve18 subs. Do I need a crossover with this setup or am I good?
Logged

Paul G. OBrien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 991
Re: Do I need a crossover
« Reply #1 on: October 20, 2019, 12:12:42 pm »
Clayton, in general an external crossover is not necessary with powered speakers as they will contain all the necessary processing for all possible configurations. In this case the fine manual indicates that the sub contains a switchable 100hz hi pass filter that should be engaged when tops are connected to the output jacks.
Logged

ProSoundWeb Community

Re: Do I need a crossover
« Reply #1 on: October 20, 2019, 12:12:42 pm »

Pages: [1]   Go Up
« previous next »
 



Page created in 0.032 seconds with 24 queries.