ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 8 9 [10]   Go Down

Author Topic: New X32?  (Read 5882 times)

Douglas R. Allen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1015
Re: New X32?
« Reply #90 on: November 08, 2019, 01:59:26 pm »

V4 of X- Edit is up. Firmware shouldn't be too far behind. I hope people don't put V4 Edit on their laptops/tablets etc. then go out this weekend and it does not work with the older firmware!

Douglas R. Allen

I'm hearing now they pulled it and its not available. Anyone know for sure?
Douglas R. Allen
Logged

Douglas R. Allen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1015
Re: New X32?
« Reply #91 on: November 08, 2019, 02:01:11 pm »

DL8? Like a DL16?
Douglas R. Allen

Found it on the site.

Douglas R. Allen
Logged

Robert Lofgren

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 799
Re: New X32?
« Reply #92 on: November 08, 2019, 02:22:47 pm »

Hub4 is IEEE802.3at, so any injector that supports it... However the dp48 uses ieee802.3af according to my notes, but I assume that at is backwards compatible with af...?

Well, we are 5 hours behind them after all  ;D
I'm quite interested in the DL8, would make for a wonderful breakout snake for drums or remote stage drops. The fact that it's PoE is even better, I wonder if it can be powered off a standard injector and not the HUB4...
Logged

Taylor Hall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 730
Re: New X32?
« Reply #93 on: November 08, 2019, 03:29:55 pm »

Hub4 is IEEE802.3at, so any injector that supports it... However the dp48 uses ieee802.3af according to my notes, but I assume that at is backwards compatible with af...?

I think it varies from manufacturer, but I do know that there are many af (PoE) devices that will work with the at (PoE+) standard. It seems like it really boils down to if the PoE device actually adheres to that standard and is not something proprietary (ubiquiti, etc), then it should be able to properly initiate a connection with a PoE+ source.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

ProSoundWeb Community

Re: New X32?
« Reply #93 on: November 08, 2019, 03:29:55 pm »


Pages: 1 ... 8 9 [10]   Go Up
 



Page created in 0.064 seconds with 23 queries.