ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Current measurement tool for Lounge Level?  (Read 3420 times)

Ned Ward

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1490
  • Redondo Beach, CA
    • Our band's page on Facebook
Current measurement tool for Lounge Level?
« on: October 11, 2019, 12:30:46 PM »


OK, so while you can scour the owners manuals and webs to estimate current draw, what tools can be used to check how much current is being drawn on 15 or 20 amp circuits? We recently played at a church fundraiser where the circuits tripped and our keyboard kept resetting due to voltage dips.


Not looking for Fluke tester, but something that plugs into power to help folks understand how much power is being drawn from stage, PA, lights, etc.


This is less for full time show people, and more for those lower-rung fundraisers or festivals so that we know how many amps are being drawn...


thanks!

Logged

Chris Hindle

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 2693
  • Montreal, Quebec, Canada, Earth, Sol System,......
Re: Current measurement tool for Lounge Level?
« Reply #1 on: October 11, 2019, 12:40:24 PM »

Look for the Coffee Pot that was on his circuit......

Seriously though, I have a clamp on ammeter, and I made a handful of 1' long AC "plugs and sockets" that give me access to the inner conductors.
You'd be surprised how little current most audio stuff draws.
Except PM3K's...........
Chris.
Logged
Ya, Whatever. Just throw a '57 on it, and get off my stage.

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2315
    • Check Check One Two
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Rick Earl

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 492
Re: Current measurement tool for Lounge Level?
« Reply #3 on: October 11, 2019, 02:25:15 PM »

OK, so while you can scour the owners manuals and webs to estimate current draw, what tools can be used to check how much current is being drawn on 15 or 20 amp circuits? We recently played at a church fundraiser where the circuits tripped and our keyboard kept resetting due to voltage dips.


Not looking for Fluke tester, but something that plugs into power to help folks understand how much power is being drawn from stage, PA, lights, etc.

I keep one of these with me and use my regular clamp on meter: https://www.kleintools.com/catalog/test-measurement-accessories/line-splitter-10x


This is less for full time show people, and more for those lower-rung fundraisers or festivals so that we know how many amps are being drawn...


thanks!
Logged

Jeff Bankston

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2568
Re: Current measurement tool for Lounge Level?
« Reply #4 on: October 11, 2019, 02:30:38 PM »

Look for the Coffee Pot that was on his circuit......

Seriously though, I have a clamp on ammeter, and I made a handful of 1' long AC "plugs and sockets" that give me access to the inner conductors.

Thats the same things I use.

Logged

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1318
  • Palo Alto, CA USA
Re: Current measurement tool for Lounge Level?
« Reply #5 on: October 11, 2019, 02:54:56 PM »

OK, so while you can scour the owners manuals and webs to estimate current draw, what tools can be used to check how much current is being drawn on 15 or 20 amp circuits? We recently played at a church fundraiser where the circuits tripped and our keyboard kept resetting due to voltage dips.

Kill-a-Watt. I've had one for years. It's awesome.
http://www.p3international.com/products/p4400.html

--Frank
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23743
  • Wichita, Kansas USA
Re: Current measurement tool for Lounge Level?
« Reply #6 on: October 11, 2019, 03:07:40 PM »

If the problem was tripping breakers the question is "what else was on that circuit?"

No Kill-a-What? is going to tell you that and without opening the service panel you won't get your ammeter clamp around the wire to see what other loading may be on that circuit.

You can know everything about YOUR gear's current demands but unless you supply the distro and get a power tap, you don't know who or what is sharing your circuits.  This is why I went to tapping power long before it became fashionable... ;)
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Jeff Bankston

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2568
Re: Current measurement tool for Lounge Level?
« Reply #7 on: October 11, 2019, 03:37:39 PM »

I worked as a commercial electrician and wired up new businesses etc. Some of the plans had several receptacles near each other and another(s) some distance away on the same circuit. I have done trouble shooting before and it can take a while finding all the recepts that are on the same breaker. Once the owner/tenant moves in they might have all kinds of stuff running off a circuit that has recepts spread out. Best thing to do is pull the panel cover and clamp a meter on the circuit thats tripping to see if there is a current draw. Could be computer(s), small refrige, etc. I wired up a couple of night clubs and the stages had there own separate circuits but that doesnt mean another electrician hasnt come along and tied a coffee pot recept to a stage j-box.
Logged

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1318
  • Palo Alto, CA USA
Re: Current measurement tool for Lounge Level?
« Reply #8 on: October 11, 2019, 03:39:20 PM »

No Kill-a-What? is going to tell you that and without opening the service panel you won't get your ammeter clamp around the wire to see what other loading may be on that circuit.

Fair enough. If there's a problem with the building wiring the standard PSW answer is hire an electrician. If you're going to play electrician yourself, a pleasure I would not deny anyone, get the professional tools which would include a good Volt-Ohm-milliammeter, a clamp-on AC current probe, and possibly some sort of power-quality logger.

If you're trying to figure out what YOUR stuff draws, and the loads are less than 15 A, the Kill-a-Watt is an excellent tool. It shows, voltage, current, power, apparent power, power factor, and can integrate power to give total energy. Not bad for ~$30. And no batteries!

--Frank
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

Ed Hall

  • Classic LAB
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 260
  • Lansdale, PA
Re: Current measurement tool for Lounge Level?
« Reply #9 on: October 11, 2019, 04:05:42 PM »

Look for the Coffee Pot that was on his circuit......

Seriously though, I have a clamp on ammeter, and I made a handful of 1' long AC "plugs and sockets" that give me access to the inner conductors.
You'd be surprised how little current most audio stuff draws.
Except PM3K's...........
Chris.

I have similar. Made it from some spare parts so it cost me nothing except the 5 minutes to assemble it. I’ve tested most of the gear running at FTB so I already have an idea of what it draws.

It lives in my tool kit along with the meter. I meter EVERYTHING before I plug anything in.

I don’t use a PM3K.  ;)
Logged
I can't change reality just because you don't like it!

ProSoundWeb Community

Re: Current measurement tool for Lounge Level?
« Reply #9 on: October 11, 2019, 04:05:42 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 25 queries.