ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Nexo RS15 Repair  (Read 215 times)

Tyler Robinson

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
    • TnT Live Sound Productions
Nexo RS15 Repair
« on: October 10, 2019, 04:12:17 am »

I have a nexo RS15 I bought from a local production house. After about 3 shows the top seems to be coming un jointed on the exterior edges. Any advice on repairing?

Thanks
Logged

Chris Grimshaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1247
  • Sheffield, UK
    • Grimshaw Audio
Re: Nexo RS15 Repair
« Reply #1 on: October 13, 2019, 09:38:55 am »

If it's the cabinet that's having problems, I'd say you have two options:

1 - Stick a load of wood filler in there and hope the gap doesn't expand further
2 - Prise the top off the cabinet, sand the edges to join, and use plenty of good wood glue to stick it back down, with plenty of clamps.

Chris
Logged
Sheffield-based sound engineering.
www.grimshawaudio.com

Tyler Robinson

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
    • TnT Live Sound Productions
Re: Nexo RS15 Repair
« Reply #2 on: October 14, 2019, 01:54:54 pm »

If it's the cabinet that's having problems, I'd say you have two options:

1 - Stick a load of wood filler in there and hope the gap doesn't expand further
2 - Prise the top off the cabinet, sand the edges to join, and use plenty of good wood glue to stick it back down, with plenty of clamps.

Chris

Probably going to have to go with option 2. As the crack is a super fine hairline that only causes a faint noise at higher spl. No normal client would notice but when I do events for Yamaha, I would feel bad having less then perfect conditions.
Logged

ProSoundWeb Community

Re: Nexo RS15 Repair
« Reply #2 on: October 14, 2019, 01:54:54 pm »


Pages: [1]   Go Up
 



Page created in 0.054 seconds with 26 queries.