ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Clearcom Freespeak SFP  (Read 911 times)

Neil White

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 276
Clearcom Freespeak SFP
« on: October 22, 2018, 12:16:59 pm »

Does anyone know what spec SFP are required for the Freespeak II Base and Antenna Splitter connections? Are they standard Gigabit Ethernet transceivers even though it isn't IP to the antennas?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6724
  • Audio Plumber
Re: Clearcom Freespeak SFP
« Reply #1 on: October 22, 2018, 01:06:00 pm »

Does anyone know what spec SFP are required for the Freespeak II Base and Antenna Splitter connections? Are they standard Gigabit Ethernet transceivers even though it isn't IP to the antennas?

Yes.

Mac
Logged

Neil White

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 276
Re: Clearcom Freespeak SFP
« Reply #2 on: October 22, 2018, 02:24:18 pm »

Yes.

Mac

Great. Iíve got some nice BiDirectional single strand Gigabit SFP on the shelf so will give them a shot.
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6724
  • Audio Plumber
Re: Clearcom Freespeak SFP
« Reply #3 on: October 22, 2018, 03:05:06 pm »

Great. Iíve got some nice BiDirectional single strand Gigabit SFP on the shelf so will give them a shot.

That's what I used last.

Mac
Logged

Brian Hancock

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 69
Re: Clearcom Freespeak SFP
« Reply #4 on: June 24, 2019, 08:54:59 pm »

So sorry to resurrect an old thread but just wanted to confirm what specific sfp's people have been able to get to work ... any gig sfp seems a bit broad ... I have a bunch of hp procurve managed switches with sfp's but also access to tp link and a few Cisco ones anyway I can do some trial and error but basically I'd just be curious about everyone's experiences ... ideally it's a wdm bidi sfp so 1 strand is all that's used
Logged

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1366
    • Best Audio
Re: Clearcom Freespeak SFP
« Reply #5 on: June 25, 2019, 01:06:49 pm »

So sorry to resurrect an old thread but just wanted to confirm what specific sfp's people have been able to get to work ... any gig sfp seems a bit broad ... I have a bunch of hp procurve managed switches with sfp's but also access to tp link and a few Cisco ones anyway I can do some trial and error but basically I'd just be curious about everyone's experiences ... ideally it's a wdm bidi sfp so 1 strand is all that's used


with freespeak any gigabit is fine. I use bidirectional from many manu with no issues.  The needed BW is very low.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Diogo Nunes Pereira

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
  • Barcelona, sometimes...
Re: Clearcom Freespeak SFP
« Reply #6 on: October 03, 2019, 09:39:32 am »


with freespeak any gigabit is fine. I use bidirectional from many manu with no issues.  The needed BW is very low.

I'm in my first show with a FSII splitter. During setup I tried to use the SFPs from our Luminex and Cisco switches without success. We ended up using copper to the splitter. I'll give it another go during strike tomorrow, but I'm curious why it didn't work. I used a standard duplex LC-LC cable.
Logged
Diogo Nunes Pereira
elraval@gmail.com
--------------------------
"I envy not those who own charriots, horses or land. I envy only those who drink water from every spring." - Popular Song from Portugal

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1366
    • Best Audio
Re: Clearcom Freespeak SFP
« Reply #7 on: October 03, 2019, 09:50:39 am »

I'm in my first show with a FSII splitter. During setup I tried to use the SFPs from our Luminex and Cisco switches without success. We ended up using copper to the splitter. I'll give it another go during strike tomorrow, but I'm curious why it didn't work. I used a standard duplex LC-LC cable.

did you turn on the fiber in the software?
« Last Edit: October 03, 2019, 09:55:28 am by Pete Erskine »
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Diogo Nunes Pereira

  • Full Member
  • ***
  • Offline Offline
  • Posts: 171
  • Barcelona, sometimes...
Re: Clearcom Freespeak SFP
« Reply #8 on: October 03, 2019, 05:48:31 pm »

did you turn on the fiber in the software?

oops... no I didn't. Thanks for the screenshot. Will try tomorrow! Cheers,

D
Logged
Diogo Nunes Pereira
elraval@gmail.com
--------------------------
"I envy not those who own charriots, horses or land. I envy only those who drink water from every spring." - Popular Song from Portugal

ProSoundWeb Community

Re: Clearcom Freespeak SFP
¬ę Reply #8 on: October 03, 2019, 05:48:31 pm ¬Ľ


Pages: [1]   Go Up
 



Page created in 0.099 seconds with 23 queries.