ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Biamp gets tweeter. Passive gets LF drivers only.  (Read 3980 times)

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23784
  • Wichita, Kansas USA
Re: Biamp gets tweeter. Passive gets LF drivers only.
« Reply #20 on: October 01, 2019, 10:30:32 AM »
Quote from: Dave Guilford on October 01, 2019, 08:39:10 AM
Testing was done with NL2

Son, that there's your problem.  You can't send it a bi-amp signal on such cabling.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3110
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Biamp gets tweeter. Passive gets LF drivers only.
« Reply #21 on: October 01, 2019, 03:03:19 PM »
I don't think biamp was the goal but just flipping the bi-amp/passive as a form of trouble shooting to maybe just reseat the switch contacts.

Since there is no pin set 2 on an NL2 that rules out any connector mis wiring for your use. Switched to bi-amp mode using your cable should give you just the woofer.

Yep bad crossover or switch.

Logged

Dave Guilford

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 403
Re: Biamp gets tweeter. Passive gets LF drivers only.
« Reply #22 on: October 01, 2019, 06:57:43 PM »
Quote from: Tim McCulloch on October 01, 2019, 10:30:32 AM
Son, that there's your problem.  You can't send it a bi-amp signal on such cabling.

Nope. You must have misread my posts. Thanks though.
Logged

ProSoundWeb Community

Re: Biamp gets tweeter. Passive gets LF drivers only.
« Reply #22 on: October 01, 2019, 06:57:43 PM »

Pages: 1 2 [3]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.019 seconds with 24 queries.