Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[brian maddox]

For easy, small and diverse tilting adaptors have a look at the Martin Audio CDD Live tilters. Quite pricy though.

Do you have a iink?  I think i've used what you're referring to and i wasn't super impressed.  But i may be thinking of a different piece of hardware.

[Geert Friedhof]

Do you have a iink?  I think i've used what you're referring to and i wasn't super impressed.  But i may be thinking of a different piece of hardware.

For the 12": https://static.martin-audio.com/downloads/datasheets/accessories/ASF20046%20datasheet.pdf

[Dave Garoutte]

For the 12": https://static.martin-audio.com/downloads/datasheets/accessories/ASF20046%20datasheet.pdf

A friend of mine who is a Martin Audio user looked at those and ended up buying a set of my betas. 
I think he said the Martin ones listed for $700 or so.

[Rob Spence]

I have a pair of Anglers and BTs. I use them for different uses.
The anglers for my biggish EV ZXa5s and the BT for the DXR10s.

Love them both.

[Debbie Dunkley]

So I've decided to go all 12 AWG 2 pole Speakons at 15ft each. Although this length is a bit longer than I need considering each amp will be 'stack side', it allows some flexibility if I had an amp go down.
Without this consideration, I would have gone shorter as was mentioned earlier - perhaps 3-5ft to subs and 8-10ft to the tops but I have to consider failure and that is one of the reasons I got the 2 amps in the first place.
If that occurred, I could use my Neutrik Speakon couplers to connect 2 of the 15's together (twice) for a 30ft run which would be enough to get me out of trouble, and simply jump from the 'working side' to the other stack. I am trying to keep things simple and in the event of an emergency, not have to re-configure and spend a bunch of time re-wiring. Under pressure I tend to get anxious unless I know exactly what I am doing.
Also 12AWG 2 pole cable is SO much easier to coil than heavy duty 4 pole.
I am going to use 2u rack cases and keep the cables in the rack with the amps.
Soooo looking forward to delivery.

[Debbie Dunkley]

I have a pair of Anglers and BTs. I use them for different uses.
The anglers for my biggish EV ZXa5s and the BT for the DXR10s.

Love them both.

I don't have the BT's but I love my 'Dave' Anglers.....

[Geert Friedhof]

So you are going to use patchpanels, since the T602 has only 4 pole connectors?

BTW: When will you have the system delivered and complete?

[Mike Pyle]

So you are going to use patchpanels, since the T602 has only 4 pole connectors?

Not necessary. The T602 has the typical pair of speakon connectors.

If Debbie had to run the system on one amp she can parallel using the through connectors on the cabs.

[Debbie Dunkley]

So you are going to use patchpanels, since the T602 has only 4 pole connectors?

BTW: When will you have the system delivered and complete?

Wasn't planning to at least at first. Not sure why 12/2 cable wouldn't work - the Speakon connectors are 4 pole. Is there something I am missing?

[Debbie Dunkley]

Not necessary. The T602 has the typical pair of speakon connectors.

If Debbie had to run the system on one amp she can parallel using the through connectors on the cabs.

Thanks Mike.....

BTW to all:

Mike Pyle has been guiding and helping me in my decisions. He is the BOMB and could not have been more generous with his time and support throughout this time. I purchased the system through him but got a lot more than I expected. BIG shout out to Mike Pyle!

[ProSoundWeb Community]