ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Direct Burial Mic/Line Cable  (Read 3213 times)

Adam Kane

  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Battle Creek, MI
Direct Burial Mic/Line Cable
« on: September 17, 2019, 02:44:58 PM »

Anyone aware of direct burial wiring similar to WP291/292? I usually put this stuff in conduit for obvious reasons, but may have a situation where I'll have to bury some.
Logged

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: Direct Burial Mic/Line Cable
« Reply #1 on: September 17, 2019, 05:31:07 PM »

Anyone aware of direct burial wiring similar to WP291/292? I usually put this stuff in conduit for obvious reasons, but may have a situation where I'll have to bury some.
Have a look at Belden 133105A
https://www.belden.com/products/industrial/cable/bus-cable/rs485
-Hal
Logged

MikeHarris

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 490
Re: Direct Burial Mic/Line Cable
« Reply #2 on: September 18, 2019, 02:25:57 AM »

Logged

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: Direct Burial Mic/Line Cable
« Reply #3 on: September 18, 2019, 12:48:34 PM »

West Penn has AQC291...292/293

http://store.nexternal.com/westpenn/aquaseal-shielded-aqc-c469.aspx
That's what I would pull through buried conduit. Buried conduit is considered a wet location. Don't know if I would want to direct bury that though. No protection.
Why don't you want to use conduit?

-Hal
Logged

Adam Kane

  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Battle Creek, MI
Re: Direct Burial Mic/Line Cable
« Reply #4 on: September 19, 2019, 11:28:35 AM »

That's what I would pull through buried conduit. Buried conduit is considered a wet location. Don't know if I would want to direct bury that though. No protection.
Why don't you want to use conduit?

-Hal

It's not that I don't want to. I'm going to be at the mercy of what the customer is willing to do. Odd circumstances here, but it's either going to work out for them to pay me to bury conduit and pull the wire, or they are going to buy the wire and direct bury it themselves. They were going to buy a couple hundred feet of black portable cord and bury that until I stepped in.
Logged

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: Direct Burial Mic/Line Cable
« Reply #5 on: September 19, 2019, 06:29:50 PM »

It's not that I don't want to. I'm going to be at the mercy of what the customer is willing to do. Odd circumstances here, but it's either going to work out for them to pay me to bury conduit and pull the wire, or they are going to buy the wire and direct bury it themselves. They were going to buy a couple hundred feet of black portable cord and bury that until I stepped in.
With customers like that I would let them do what they want themselves. At least you know where to look each time you go back to fix it. Just tell them that we're going to be seeing a lot of each other.  ;D
-Hal
Logged

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1318
  • Palo Alto, CA USA
Re: Direct Burial Mic/Line Cable
« Reply #6 on: September 22, 2019, 12:39:24 PM »

It's not that I don't want to. I'm going to be at the mercy of what the customer is willing to do. Odd circumstances here, but it's either going to work out for them to pay me to bury conduit and pull the wire, or they are going to buy the wire and direct bury it themselves. They were going to buy a couple hundred feet of black portable cord and bury that until I stepped in.

I strongly recommend to use 1/2 in. trade size schedule 40 PVC conduit. The stuff is ridiculously cheap, east to work with (flexible), and I've never had an animal chew through it. I've had gophers through bears chew all manner of "direct burial" wire, polyethene water tubing, and rubber garden hoses. It's also a lot less likely to have someone put a shovel through it. A big part of the cost is the trenching anyway, so they might as well drop in a conduit. PVC rules. --Frank in critter country
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

Gary Phillips

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 23
  • Annapolis MD USA
Re: Direct Burial Mic/Line Cable
« Reply #7 on: October 09, 2019, 02:21:11 PM »

I strongly recommend to use 1/2 in. trade size schedule 40 PVC conduit. The stuff is ridiculously cheap, east to work with (flexible), and I've never had an animal chew through it. I've had gophers through bears chew all manner of "direct burial" wire, polyethene water tubing, and rubber garden hoses. It's also a lot less likely to have someone put a shovel through it. A big part of the cost is the trenching anyway, so they might as well drop in a conduit. PVC rules. --Frank in critter country
Agreed except for the size. PVC conduit is more difficult to pull cable through than metal, so I’d use 1” trade size minimum.  And pull a piece of fish line with the cable for future use.
Logged

Caleb Dueck

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1697
  • Sierra Vista, AZ
Re: Direct Burial Mic/Line Cable
« Reply #8 on: October 09, 2019, 09:41:31 PM »

Agreed except for the size. PVC conduit is more difficult to pull cable through than metal, so I’d use 1” trade size minimum.  And pull a piece of fish line with the cable for future use.

Watch out for bends - small pull string, especially fish line, can 'saw' through the inner radius of corners and bring the wire pull to a dead stop.
Logged
Experience is something you get right after you need it.

ProSoundWeb Community

Re: Direct Burial Mic/Line Cable
« Reply #8 on: October 09, 2019, 09:41:31 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.047 seconds with 25 queries.