ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Crossovers In Space: Examining Phase Alignment & Cancellation At Various Frequen  (Read 3150 times)

M. Erik Matlock

  • Global Moderator
  • Sr. Member
  • *****
  • Offline Offline
  • Posts: 456
  • Senior Editor Live Sound International/ProSoundWeb
    • M. Erik Matlock on PSW

Crossovers In Space: Examining Phase Alignment & Cancellation At Various Frequencies
Analysis to help in avoiding dips in the frequency response of the total system.
By Michael Reed • September 10, 2019

Most of us have heard of the electronic crossover. This familiar concept is in the electronic (or digital) domain and deals with frequency response of a system.

Certain drivers will take responsibility to reproduce certain frequencies, and at the crossover, will share in producing sound in a certain range with another source. As the frequency extends in one direction or another beyond it, one driver will take over. The amount of frequency content that is shared is the result of the slope and type of crossover.

The less considered type is called the acoustic crossover. This is a point in (inner) space where two signals from separate sources combine at equal level. I’ll be talking about points in earthly space from here on – sound doesn’t do to well in outer space...

Continue reading here:
Train the next generation. Success without a successor is ultimately failure.
Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.024 seconds with 17 queries.