ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Donner & blizzard Fab5  (Read 499 times)

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3513
  • Boston Metro North/West
    • Lynx Audio Services
Donner & blizzard Fab5
« on: September 08, 2019, 04:11:10 PM »

I was trying out some Donner units I got.

When I plugged the Donner receiver into my fixture and connected its power adapter, the display on the fixture went out.

It came back on if I either removed the Donner receiver or pulled the power from the Donner.

Any idea why this isnít working?

Is the fixture by any chance trying to provide power on the DMX input connector?
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

Jason Fultz

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: Donner & blizzard Fab5
« Reply #1 on: September 08, 2019, 06:54:44 PM »

I was trying out some Donner units I got.


When I plugged the Donner receiver into my fixture and connected its power adapter, the display on the fixture went out.

It came back on if I either removed the Donner receiver or pulled the power from the Donner.

Any idea why this isnít working?

Is the fixture by any chance trying to provide power on the DMX input connector?

Yes ,many of the Blizzard fixtures provide power like that.
Logged

ProSoundWeb Community

Re: Donner & blizzard Fab5
¬ę Reply #1 on: September 08, 2019, 06:54:44 PM ¬Ľ


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 18 queries.